Pipes,tubes
Fitting
Round,Square bars
Plates,Sheets,Strips
Flanges & Other kinds of forgings products
Nickel-Copper-Chromium-Silicon: UNS N12160,2.4880 alloy
Chemical Composition:
|
Material |
Ni |
Cr |
Iron |
Mn |
C |
Si max |
S max |
Ti |
Mo |
P max |
W 钨 |
Cb+Ta |
Co |
|
N12160 |
remainder |
26.0-30.0 |
3.5max |
1.50 |
0.150 |
2.4-3.0 |
0.015 |
0.20-0.80 |
1.0 |
0.03 |
1.0 |
Cb 1.0 |
27.0-33.0 |
Mechanical Properties:
|
Tensile Strength,Min PSI (MPa) |
Yield Strength (0.2% offset) Min(Mpa) |
Elongation in 2 in. or 50mm or 4D,Min.,% |
|
90000(620) |
35000(240) |
40 |
Standards:
|
Material |
Seamless Tubing &/or Pipe |
Welded Tubing |
Welded Pipe |
Buttweld fitting |
Plate/Sheet/Strip |
Bar Forging and Forging stock |
|
N12160 |
SB-622 |
SB-626 |
SB-619 |
SB-366 |
SB-435 |
SB-564, SB-572 |
Applications:
N12160 nickel alloy is an alloy of nickel, further classified as a wrought nickel. It is typically furnished in the annealed condition. 2.4880 is the EN numeric designation for this material. N12160 is the UNS number.