In the following forms:
Pipes,tubes
Buttweld Fitting
Round,Square,flat bars,rods
Plates,Sheets,Strips
Flanges & Other kinds of forgings products
Standards: ANSI, DIN, EN, JIS
Nickel-Molybdenum-Chromium-Iron UNS N10242,Haynes 242,alloy 242
Chemical Composition:
|
Material |
Ni |
Cr |
Iron |
Mn |
Al |
C |
Cu |
Si max |
S max |
Mo |
P max |
Co |
|
N10242 |
remainder |
7.0-9.0 |
2.0 max |
0.80 |
0.50 |
0.030 |
0.50 |
0.80 |
0.015 |
24.0-26.0 |
0.03 |
1.0 |
Mechanical Properties:
|
Tensile Strength,Min PSI (MPa) |
Yield Strength (0.2% offset) Min(Mpa) |
Elongation in 2 in. or 50mm or 4D,Min.,% |
|
105000(725) |
45000(310) |
40 |
Standards :
|
Seamless Tubing &/or Pipe |
Welded Tubing |
Welded Pipe |
Buttweld fitting |
Plate/Sheet/Strip |
Bar Forging and Forging stock |
|
SB-622 |
SB-626 |
SB-619 |
SB-366 |
SB-434 |
SB-564 , SB-573 |
Alloy 242 is an age hardenable nickel-molybdenum-chromium alloy which
derives strength from a log-range ordering reaction upon aging. It has
tensile and creep strength properties up to 1300°F which are as much as
double for solid solution strengthened alloys, but with high ductility
in the aged condition. The thermal expansion characteristics of alloy
242 are much lower than those for most other alloys, and it has very
good oxidation resistance up to 1500°F.