In the following forms:
Pipes,tubes
Buttweld Fitting
Round,Square,flat bars,rods
Plates,Sheets,Strips
Flanges & Other kinds of forgings products
Nickel-Iron-Chromium-Molybdenum N06002
Chemical Compostion:
|
Material |
Ni |
Cr |
Iron |
Mn |
C |
Si max |
S max |
Mo |
P max |
W 钨 |
Co |
|
N06002 |
remainder |
20.5-23.5 |
17.0-20.0 |
1.00 |
0.05-0.15 |
1.00 |
0.030 |
8.0-10.0 |
0.04 |
0.20-1.0 |
0.5-2.5 |
Mechanical Properties:
|
Material |
Tensile Strength,Min PSI (MPa) |
Yield Strength (0.2% offset) Min(Mpa) |
Elongation in 2 in. or 50mm or 4D,Min.,% |
|
N06002 |
100000(690) |
40000(276) |
35 |
Standards:
|
Material |
Seamless Tubing &/or Pipe |
Welded Tubing |
Welded Pipe |
Buttweld fitting |
Plate/Sheet/Strip |
Bar Forging and Forging stock |
|
N06002 |
SB-622 |
SB-626 |
SB-619 |
SB-366 |
SB-435 |
SB-572 |
Hastelloy X is a nickel-chromium-iron-molybdenum superalloy with outstanding high temperature strength, oxidation resistance, and
fabricability. Alloy X’s oxidation resistance is excellent up to 2200°
F. This nickel steel alloy has also been found to be exceptionally
resistant to stress-corrosion cracking in petrochemical applications.
Matrix stiffening provided by the molybdenum content results in high
strength in a solid-solution alloy having good fabrication
characteristics. Although this nickel alloy is primarily noted for heat
and oxidation resistance it also has good resistance to chloride
stress-corrosion cracking, carburization, and excellent resistance to
reducing or carburizing atmospheres. Two common conditions that often
lead to early failure in high temperature alloys, carburization and
nitriding, Hastelloy X resists.